Lubrication Equipment

 

Mechanical & Hydraulic Specialty Tools

Enerpac offers the most complete line of mechanical and hydraulic Specialty Tools in the industry. Designed to efficiently and safely solve unique maintenance and production challenges such as bearing & wheel pulling, pipe bending, cutting, spreading and tensioning applications.

Enerpac’s Specialty Tools are available in both hydraulic and mechanical configurations, and are also available as complete sets – the precise matching of tools, pumps and system components – to make your work easier and safer to perform.


PS-Series, PocketShear®
  • Available in battery or hydraulic versions and sizes to cut .5 inch or .6 inch strand sizes
  • Reversible, hardened blades extend life and provide over 2,000 cuts
  • Shear tendons inside the pocket, providing controlled tendon length without applying heat to the anchorage
  • Battery models include two industrial 28 VDC battery packs and fast charger
  • Battery models shipped in durable product case for protection and easy transport
  • Eliminates the need for Hot Work Permits on the job when cutting tendon tails
  • Provides quick and effortless tendon cutting with no risk of abrasive saw kick-back
WR, A-Series, Hydraulic Wedgie and Spread Cylinders
  • Enerpac hydraulic wedgie and spread cylinders have a capacity of .75 to 1.00 tons.
  • Single-acting, spring return
  • WR-15: For long stroke spreading applications
  • WR-5: For use in very confined work areas
  • A-92: Spreader attachment screws onto RC-Series 10 ton cylinders (except RC-101)

 

STB-Series, Pipe Bender Sets
  • Enerpac pipe bender sets make smooth, wrinkle free bends
  • Pipe bender sets include cylinder, hose and manual, air or electric pump
  • Sets are also available without hydraulics
  • Bending shoes and bending frame are lightweight, heat-treated aluminum
  • All sets include sturdy steel storage case
  • All sets include BZ-12091 angle indicator for accurate bending
  • BZ-12377 Shoe Lock Pin included in every pipe bending set
  • Eject-O-MaticTM benders (STB-202 models) use a double-acting cylinder to eject pipe from the bending shoe
WMC-Series, Self-Contained Hydraulic Cutters
  • Enerpac self-contained hydraulic cutters are designed with rotating heads for operator convenience
  • Guillotine action (except WMC-1000) for efficient operation
  • Carrying bag included for easy carrying and tool protection
  • Velcro straps to secure handles on larger models for easy transportation
  • Spring return on all models
  • Lightweight, self-contained hydraulic cutters, can be used anywhere
WHC, WHR-Series, Hydraulic Cutterheads
  • Single-acting, spring return on all hydraulic cutterhead models,, except WHR-1250
  • Guillotine action for efficient operation
  • Lifting handles on larger models
  • Carrying bag included for easy carrying and tool protection
  • Ideal for use with most Enerpac pumps featuring 3-way valve or dump valve and 10,000 psi pressure rating (except WHR-1250, which requires 4-way valve)
  • CR-400 coupler and dust cap included on all hydraulic cutterhead models

 

CM-Series, Industrial Storage Cases
  • Protect your equipment from dust, water, grease and dirt with Enerpac's industrial storage cases
  • Reduce losses on the jobsite, maintenance area or shop
  • Durable steel, painted with rust-resistant primer and finished in durable enamel
  • Heavy duty storage case hinges and lifting handles
  • Lockable

 

SP-Series, Lightweight Hydraulic Punch

Enerpac's lightweight hydraulic punch is Much Faster than Drilling...

  • .50" thick mild steel maximum capacity
  • Round, oblong and square punches and dies are available to solve your punching applications
  • Long life Enerpac single-acting, spring return design
  • Durable steel case keeps hydraulic punch tools and dies together and provides for easy carrying and storage
  • CR-400 coupler included
LW-Series, Vertical Lifting Wedge
  • Enerpac vertical lifting wedge requires a .39 inch access gap
  • Lifting force 16 ton at 10,000 psi hydraulic pressure
  • Automatic mechanical retraction (single acting)
  • Securely raises or lowers 16 tons with no slippage
  • Lifting wedge LW-16 includes safety block SB-2
  • Use in tandem to lift 32 tons, or 64 tons
  • .83 inch of vertical lift from each step (maximum lift to 2.72 inches with optional LWB-1 stepped block)

 

SP-Series, 50 Ton Hydraulic Punch
  • Enerpac 50 ton hydraulic punch is available as a complete set including electric pump and hoses
  • Double-acting cylinder design for fast cycle times
  • Hydraulic punch and die changeover tools included
  • Lifting handle for easy carrying
  • Adjustable power stripper prevents movement of the metal during stripping
  • CR-400 female couplers included

 

ELP, ER, ES-Series, Heavy-Duty Caterroller Load Skates

Enerpac heavy duty caterroller load skates are designed to Move Heavy Loads Easily and Safely

  • Rugged and sturdy construction for long life
  • Low profile construction for increased stability
  • Low rolling-resistance allows for easy load management
  • Attachable load leveling plates and swivel turntables for turning corner
MS-Series, Hydraulic Maintenance Sets

The Universal Hydraulic Tool Box

Enerpac maintenance sets are a complete assortment of accessories matched to hydraulic power tools

  • All sets include Enerpac pump, hose, cylinder, and gauge
  • Lock-on or threaded connectors
  • Complete set for almost every maintenance application
ST-Series, Tool-Pump Sets
  • Enerpac hydraulic tool pump sets are the optimum match for individual set components
  • Pre-selected combinations, ready-for-use
  • All pump sets include:
    - Hydraulic tool, single-acting
    - Two-speed hand or foot pump, Turbo II air or electric pump
    - HC-7206 high pressure hydraulic hose
  • GP-10S pressure gauge with GA-2 gauge adaptor
  • STP-set with hydraulic punch.
    Also available as 50 ton hydraulic punch set
  • STC-set with hydraulic cutter head
  • STB-set with pipe bender
DA, PTJ-Series, Mono-Strand Stressing Tools
  • Enerpac mono-strand stressing tools are field proven tools for mono-strand tensioning
  • Durable, field-proven designs, with "soft-grip" ergonomic handles reduce operator fatigue
  • Single-acting PTJ mono-strand stressing models, with spring-seating and optional power-seating are equipped with the new Enerpac RC Post-tensioning cylinders with a 10" stroke, ideal for slab-on-grade applications
  • Double-acting DA mono-strand stressing models have an 8.5" stroke and are machined from a steel billet; feature standard power-seating and "gun-drilled" internal hydraulic passages
  • All jacks have a standard 3" nose assembly. Longer nose assemblies are available as accessories for all models
  • A full line of grippers is available to tension common strand diameters
  • Complete offering of Enerpac parts and soft kits allow quick and easy service
MS-Series, Base, Collar and Plunger Attachments
1 : Threaded Adaptor
2 : Base Attachment       
3 : Collar Toe
4 : Flat Base
5 : Threaded Connector
6 : Lock-on Clamp Toe
7 : Threaded Plunger Toe
8 : Collar Clamp Head
9 : Spreader Toe
10 : Serrated Saddle
11 : Smooth Saddle
12 : 90° V-Base
13 : Plunger Base
14 : Wedge Head
15 : Rubber Flex-Head
MS-Series, Chains and Attachments for Pulling
16 : Single Chain Plate
17 : Double Chain Plate
18 : Chain with Hook
 
MS-Series, Tubes, Connectors and Adaptors
19 : Pipe Coupling
20 : Spreader
21 : Lock Pin
22 : Lock-on Connector
23 : male Lock-on Adaptor
24 : Female Lock-on Adaptor
25 : Adjustable Extension
26 : Slip-Lock Extension
27 : Extension Tube